BETAFLEX URETHANE SANDING SEALER F
Serie UV 1-032

Description :

Betaflex Urethane Sanding Sealer F Serie UV 1-032 are 2 component high quality polyurethane sanding sealer characterized by very fast drying properties excellent chemical and mechanical resistance followed by very good durability.

Field application :

Betaflex Urethane Sanding Sealer F Serie UV 1-032 are intended to use as a sanding sealer for wood items made of solid wood, plywood, rattan, chipboard, etc. For indoor use, such as furniture, sports equipments, parquet floor, musical instruments, car accessories, etc. Where high quality appearance combined with durability are the most important.

Betaflex Urethane Sanding Sealer F Serie UV 1-032 will give hardwearing smooth surface and resistant to scratch, impact, alcohol, water and almost of the household chemicals.

Technical Data :

Application :

Betaflex Urethane Sanding Sealer F Serie UV 1-032 must be thoroughly stirred before mixing with Beta Hardener in the ratio of 2 parts Betaflex Urethane Sanding Sealer and 1 part of Beta Urethane Hardener, then Betaflex Urethane Thinner to spraying viscosity of 15 – 18 seconds NK2 / room temperature. The mixture must be used within 6 hours.

Clean all equipments immediately after use with NC thinner N series, than rinse with Betaflex Urethane Thinner.

The solvent contain in Betaflex Urethane Sanding Sealer will, if present in sufficient vapor concentration present a fire and health hazard, therefore adequate ventilation should be provided during application drying.

Should you need more information, please contact Technical Service Department.