BETAPOX COALTAR BC 053

Description :

Betapox Coaltar BC 053 is a two component high solids, polyamide cured coating based on epoxy resins and selected coal tar.

Recommended Uses :

For long life protection of steel and concrete in severely corrosive environment. Protection of permanently submerged steel structure and buried or submerged concrete.

Features :

- good abrasion resistance
- excellent corrosion resistance
- outstanding seawater and fuel oil resistance
- harmless to grain cargo

Product Data :

Surface preparation

Abrasive blasting to Sa 2.5 (SSPC – SP10) for new steel Betapox Coaltar is compatible with most shop primer. All damage of shop primer and contamination from storage and fabrication should be thoroughly cleaned prior to final painting. Power tool cleaning to min St3 (SSPC-SP3) may be acceptable for minor touch up work.

Application Conditions

The temperature of the substrate must be minimum 10⁰C/50⁰F and at least 3⁰C above the dew point to avoid condensation. In confined spaces provide adequate ventilation during application and drying.

Subsequent coat

None, or as per specification depending on area of use.

Remarks

• The temperature of mixture paint is recommended to be at least 15⁰C/60⁰F, otherwise extra thinner may be required to obtain correct viscosity.
• Too much solvent result in lower sag and slower cure
• Thinner should be added after mixing components.
• The best time for recoating and overcoating is when the paints film as still tacky.

Precautions

This product is flammable, keep away from heat or open flames. As general rules, inhalation of solvent vapors or paint mist and contact of liquid paint with skin or eyes should be avoided.

Forced ventilation should be provided when applying in confined spaces. Respiratory, skin and eyes protection are always recommended.