BETAPOX FINISH FC 534

Welcome to Beta Chemie Homepage .......



	Products

TECHNICAL DATA
Protective Coatings Quality Paint Industries

BETAPOX FINISH FC 534

Description :

Betapox Finish FC 534 is a two component chemical resistant finish based on polyamide cured epoxy resin.

Recommended uses :

A general purpose epoxy finish in moderately to severely corrosive environment.

Features:

High resistant to impact and abrasion
Good resistant to splashes of petrol, mineral oil, vegetable and animal oil.
Good water resistant
Easy to clean

Product Data :

Finish	:	Glossy
Color	:	Available in various color on request
Volume solids	:	42 ± 2%
Specific Gravity	:	1 -1.2 depend on color
Theoretical coverage	:	10.3 m²/liter at 40 micron d.f.t.
Flash point	:	23⁰C/73⁰F
Drying time	:	Surface dry 3 hours at 25⁰C/77⁰F
		Fully cured 5 days at 25⁰C/77⁰F
Application Data :
Mixing ratio	:	7 parts base to 3 parts Hardener HV 954 by volume
Application method	:	Airless spray, spray or brush
Thinner	:	TE 0 - 219
Overcoating interval	:	min 6 hours (25⁰C/77⁰F)
		max 3 weeks (25⁰C/77⁰F)
Induction time	:	Minimum 5 minutes at 25⁰C
Pot life	:	7 hours at 25⁰C

Health and Safety:

Please Observe the precautionary notices displayed on the container. Spray under ventilation conditions. Do not breath or inhale mist. Avoid skin contact. Spillage skin should immediately be removed with suitable cleanser, soap and water, should be well flushed with water and medical attention sought immediately.

The information in this data sheet is given to the best of our knowledge based on laboratory test practical experience. However, as the product is often used under conditions beyond our control, not guarantee anything but the quality of the product itself. We reserve the right to change the give without notice.

Products

Back to Products list of Protective Coatings

Technical Data - BETAPOX FINISH FC 534