BETAPOX ZP PRIMER BE 2

Description :

Betapox ZP Primer BE 2 is a two pack epoxy primer containing zinc phosphate as corrosion inhibiting pigment.

Recommended uses:

As general purpose primer in new construction or maintenance on steel and other metal surface in moderately to severely corrosive environment.

Features :

- good adhesion to steel and non ferrous metal
- suitable for overcoating with a wide range of heavy duty topcoats
- good abrasion resistance
- temperature resistance 100 – 150⁰C

Product Data :

Surface Preparation

Abrasive blast clean to Sa 2.5 SIS 05 5900 (SSPC – SP10). Surface defects should be ground, filled or treated in the appropriate manner. If required for temporary coating, use suitable shopprimer. All damage of shopprimer and contamination from storage and fabrication should be thoroughly cleaned.

Application Conditions

The temperature of the substrate should be minimum 10⁰C/50⁰F. Also where application and that of the paint itself must also be above this limit. Apply only on dry and clean surface, free from any contamination. Provide adequate ventilation during drying and application in confined spaces.

Subsequent coat

Epoxy system or according to specification.

Remarks

The maximum overcoating interval is dependent on the integrity of the exposed film. After exposure in contaminated environment, clean the surface thoroughly by high pressure fresh water and allow to dry.

Precautions

This product is flammable, keep away from heat or open flames. As general rules, inhalation of solvent vapors or paint mist and contact of liquid paint with skin or eyes should be avoided.

Forced ventilation should be provided when applying in confined spaces. Respiratory, skin and eyes protection are always recommended.